Security & Life Integrations Inc

Access Control

Can a New Integrator Take Over Your Access Control System From the Old Installer?

Posted on by Zachary Lakatosh

Can a New Integrator Take Over Your Access Control System From the Old Installer?12Nov

Yes, in most cases. The hardware on your doors is yours if you paid for it, and any licensed integrator can service it. The part that trips buildings up is not the readers or the strikes. It is the software license, the admin password and the cloud account, which are sometimes in the installer's name rather than the building's. Sort that out and a takeover is a two-day job. Leave it unsorted and the building can be locked out of its own doors by a vendor who stopped answering the phone.

This is written for the property manager or facilities director who has a working access control system and an installer who has gone quiet, been acquired, or started pricing repairs like new installs. It covers what to ask for, what carries over, and the numbers.

Three ownership situations, three answers

The first question on any takeover is who owns what, and there are three common answers.

The building bought the system outright. Readers, controllers, locks, power supplies and wiring belong to the owner. Any integrator can service them. This is the easy case, and it is most commercial buildings.

The system was leased or bundled into a monitoring contract. The hardware may belong to the vendor until the term ends, and the contract says what happens at termination. Read it before calling anyone. Some contracts transfer ownership at the end of the term; some require the equipment be returned; some roll over silently if nobody cancels in a sixty-day window.

The building owns the hardware but the software is in the vendor's name. This is the one that catches people. The controllers are yours. The ability to add an employee, remove a departed one, or change a schedule lives behind an admin login held by a company you are trying to leave. The doors keep working. Managing them does not.

What to ask the old vendor for, in writing

Three things. The ownership status of the equipment, stated plainly. The admin credentials to the software or cloud platform, transferred to a login in your name. And the as-built drawings, or at least a door schedule listing every opening, its reader, its lock type and which controller it lands on.

Ask by email so there is a record. A vendor that provides all three in a week is behaving normally. A vendor that stalls on the credentials is telling you how the next conversation will go. Switching commercial security providers has the full request list, including the notice-period math, and it is worth reading before the first call.

What carries over

Most of an access control system is wire and door hardware, and both are vendor-neutral. The cable runs from each reader and lock back to the controller are the most expensive part of the original install and the least likely to need touching. Electric strikes, maglocks, door contacts and request-to-exit sensors are standard parts that any controller can drive; we test each one during the survey and replace the ones that are already failing, but they do not need replacing because the vendor changed.

Readers usually carry over. Open-protocol readers, which is most of what has been installed in the past decade, work with a new controller. Readers tied to one platform's proprietary format get swapped, which runs $250 to $600 per door. We can tell which kind you have by reading one credential.

Controllers are the variable. Open-platform controllers can be re-licensed to new software and stay on the wall. Closed controllers, built to run one vendor's software and nothing else, get replaced. That replacement is the main cost in a takeover, and it is why the survey comes before the quote. Door access control systems explains how the parts fit together if the terms are new.

Credentials follow the readers. Fobs on an open format are re-enrolled in the new software. Proprietary fobs mean a re-issue, which is a week of a receptionist handing out new ones while both systems run.

What it costs

A takeover that keeps the wiring, strikes and readers and replaces only the controllers and software typically runs a third of a new install. For a ten-door office or clinic, that lands between $6,000 and $14,000. For an apartment community with a dozen controlled openings, the amenity doors, mail room, clubhouse and a gate, $8,000 to $20,000. A thirty- to sixty-door building, $25,000 to $60,000. Add $250 to $600 per door if the readers have to go. New installs, for comparison, run $1,500 to $3,500 per door; what access control costs per door has the line items.

Monthly costs usually fall. If the old platform charged a per-unit or per-user subscription, the replacement is priced per door or per panel, or carries no software fee at all on an on-site system. Cloud vs. on-premises access control lays out that choice without a sales lean. Afterward, a service agreement at $15 to $25 per door per month covers the inspections, batteries and user changes, and it is where most buildings end up.

How the cutover avoids locking anyone out

The survey first: every opening tested, controller model and firmware noted, credential format read, software access confirmed or confirmed missing. Then the quote, with what stays and what goes listed door by door.

The cutover is one door at a time. The new controller goes in beside the old one. One door's wiring moves over, the door is tested, the next door follows. Where the credential format carries over, people use the same fob at doors that have moved and doors that have not. Where it does not, new credentials go out over a week while both systems run. The main entrance and any gate are done last, early in the morning. Nobody arrives to a door that does not know them.

A fifteen-door apartment building in downtown Raleigh this fall had readers that carried over and controllers that did not. The cutover took two days. The longer conversation, about choosing a platform the next vendor could not orphan, took longer and mattered more. The apartment-specific version of this process, including gates and intercoms, is on apartment access control takeover.

When the old installer will not cooperate

It happens. Hardware the building owns can be serviced regardless. Without the admin credentials, open-platform controllers are re-licensed under a new account and closed ones are replaced; users are re-enrolled from the building's own records rather than exported from the old database. It costs more than a cooperative handover, mostly in the re-enrollment labor, which is why the written request comes first. Repairs do not have to wait for any of this. A strike or reader or power supply does not need the software, so a door that will not lock gets fixed while the ownership question is being settled. Access control repair covers that side, and the access control brands we service page lists the platforms we carry parts for.

Not every system should be taken over

One honest exception. A system that is working, under contract, with a vendor who answers the phone and prices repairs fairly is not a takeover candidate, and we say so when we see one. Takeovers are for orphaned, failing or overpriced systems. If the only complaint is that the current vendor is slow to return calls, a direct conversation with them is cheaper than a cutover.

Choosing a platform you will not have to leave again

The reason a takeover is needed is almost always that the last platform was closed: one installer, one license, one phone number. The way to avoid repeating it is to insist on open-protocol readers, a controller platform that more than one integrator in your market can service, and admin credentials and software licenses held in the building's name from the first day. We put that in writing on every system we install, and it is the question we would ask any vendor on your behalf. Choosing an access control system for an apartment building goes through the platform decision for multifamily, and taking over a building's security system instead of ripping it out covers the same process for cameras and alarms. City-level repair and takeover pricing is on Raleigh access control repair and Charlotte access control repair.

If you are holding a door schedule and a vendor who has stopped calling back, send us what you have. The survey is the first step and it is usually the same week.

ZL

Zachary Lakatosh

Our Certifications & Associations

NC State Board of Examiners of Electrical Contractors seal

SP-FA/LV License #36697

NC Board of Examiners of Electrical Contractors

North Carolina Department of Public Safety logo

NC Alarm Business License

NC Alarm Systems Licensing Board

North Carolina Department of Public Safety logo

Registered Alarm Technicians

NC Alarm Systems Licensing Board

South Carolina Law Enforcement Division seal

SLED Alarm Contractor License

South Carolina Law Enforcement Division

South Carolina Department of Labor, Licensing and Regulation logo

Burglar Alarm Contractor

SC Dept. of Labor, Licensing & Regulation

South Carolina Department of Labor, Licensing and Regulation logo

Fire Alarm Contractor

SC Dept. of Labor, Licensing & Regulation

NICET logo

NICET Level III

Fire Alarm Systems

$2M General Liability

Fully Insured

Brivo logo

Brivo

Manufacturer Certified

ButterflyMX logo

ButterflyMX

Manufacturer Certified

Bosch logo

Bosch Security Systems

Manufacturer Certified

Loved by Thousands of Organizations

Kesha Coley

I knew when I called and had a conversation with Donna that they would be a good fit to do business with. Donna and Zach was very friendly and responsive. I was switching from a different company and im so glad that I did. Zach came and installed a new security system for my business and was able to switch over my fire panel to meet county standards to stay in compliance. Zach was also able to switch my camera system to monitor. The transition process was smooth. Thank yall for helping us out at Brighter Minds Academy 2

Gianna

Zach with Security & Life Integrations did an awesome job with helping our new clinic set up the cameras and key fobs! He was also extremely friendly and helpful!

River Meadow

Zach, John and Omar have been simply amazing. We had a difficult fight getting our business off the ground and Security & Life helped us in every way they could. They’ve been outstanding in every way. They designed and installed dozens of cameras, ethernet ports and access control systems correctly the first time, they always answer immediately when we call and any issue we have is resolved almost immediately. We will never work with anyone else for security, fire or low voltage because you simply cannot improve on perfection.

Ruth Madrigal

I represent my company Superior Cabling Solutions, in some jobs I need to look for help from Zack my experience with him is great, he is a responsible, kind, punctual person and is an expert in his work. I recommend it 100 %.

Anto L

Zack was very nice and professional, he came as quickly as possible to resolve the issue with the doors and he was working in record time! I will definitely recommend him!

Donna Elliott

Security & Life integrations are the definition of reliability and professionalism. They communicate with precision, handle all challenges with expertise and consistently deliver results that exceed expectations.

Essa Faal

Great Experience from Start to Finish Zachary The installer arrived on time, completed the job efficiently, and made sure I understood how to use the system. The equipment is high quality, and the customer support has been great whenever I had questions. Couldn’t ask for better service.

Caya Stephens

Zach was absolutely amazing and had my system up and running in no time. It was a struggle trying to find a company that could assist me, from my initial phone call to Zach coming out this has been a great experience. I’m glad to have been able to find such a responsive company with a quick turn around. Zach I truly appreciate you and the knowledge you gave me. I’m good to go and back in business!

Stephen Faircloth

These folks do what they say they will do. I will recommend them to anyone needing the services they provide!!

Alexis Hasbrouck

Great service from Security & Life Integrations! They installed our fire and burglary alarms quickly and smoothly. Highly recommend!

Taylor Ridge

Zach and John have been amazing to work with getting switched over from ADT. Highly recommend and happy to be new customers!

Lucas Eckert

Amazing guys. John and zach are great guys and made the job seem easy. Never a mistake to choose these guys for the work.

bbrsales

SLI has been our go to fire alarm provider for years. We are very happy with their service and they even keep up with our fire alarm inspections to ensure we are in compliance. Highly Recommended…

Sparky FXSTI

Security & Life Integrations has been my preferred trusted partner of choice for all of my security needs. From the front office to the installation techs, the engaged team is very refreshing to work with for all of our needs from an industrial, warehouse, office standpoint.

Kyle Renner

Security & Life Integrations took over an existing security camera system we had onsite and I am extremely happy with the quality of the work!

Reilly Williams

Super happy with the quality of our security alarm system and cameras that they installed at both my home and business. I highly recommend. Their professionalism and service is unmatched.

Sam Maxwell

Great company to work with! I am very happy with the security cameras that they installed at our property. They are very quick to help pull footage and provide service when needed.