The fire alarm panel in your building sends three kinds of signals to a monitoring station, and the station does something different with each. Knowing which is which, and what the station needs from you to do its job, is most of what a property manager has to understand about fire alarm monitoring. The rest is a contact list and a trouble light. This is the practical version, for the manager of an office building, an apartment community, a retail center or a mixed-use property who has inherited a panel and a monitoring contract and wants to know what they are actually responsible for.
Alarm, supervisory, trouble
An alarm signal means a detector, a pull station or a waterflow switch has activated. The station dispatches the fire department immediately and then calls the contact list. No verification call first; fire alarms are dispatched on receipt.
A supervisory signal means something the system watches is in the wrong state. The common one is a sprinkler control valve that has been closed, usually by a plumber or a maintenance tech who did not reopen it. The station does not dispatch; it calls the contact list so someone can go look. A closed valve left closed is a building with no sprinkler protection, so the call matters.
A trouble signal means the system has a fault: a low battery, a ground fault, an open circuit, a lost communicator path, a dirty detector. The station logs it and notifies the contact list by phone or, on many accounts, by email. Trouble signals are repairs, and they are the signal that gets ignored the longest. What should happen when your fire alarm actually goes off walks through the alarm sequence from the building's side.
The contact list is always out of date
The station calls the people on the account's contact list, in order. In our experience the list on most inherited accounts includes at least one person who no longer works for the property, one phone number that goes to a disconnected line, and no one who can actually get to the building at 3 a.m. with a key.
Fix it once a year. The list should have, in order, the on-site person who can reach the building fastest, a backup who can, the property manager, and the regional or owner. Every name should have a mobile number and a passcode for cancelling a false alarm. Send the list to the monitoring company in writing and ask for confirmation. This is the single highest-value thing a property manager can do for the fire alarm system, and it costs nothing.
The trouble light nobody reports
Most fire alarm failures we see started as a trouble light that was on for weeks. The panel is in a mechanical room or a back hallway, the beep was silenced by whoever walked past, and the station's email went to an inbox nobody checks. Then the annual inspection finds a dead battery bank, or worse, a communicator that has not reached the station since the telecom carrier changed in March.
Two fixes. First, make sure trouble notifications go to a monitored inbox or a phone, not to a general address. Second, treat a trouble light that has been on more than a day as a service call. A low battery means the system works on normal power but not through an outage. A communication trouble means the station cannot hear the building at all, which is an unmonitored system under the fire code. Fire alarm repair explains the common troubles and what each costs to clear.
What the monthly fee covers, and what it does not
Monitoring pays for the central station's operators, the communicator's cellular or internet service, and the dispatch. It does not cover the annual inspection, repairs, batteries or the fire marshal's permit fees. Properties sometimes assume one monthly line item covers all of it, and the gap shows up as a failed inspection. Fire alarm monitoring cost: what the monthly fee buys itemizes it, and a fire alarm maintenance agreement is the usual way to put inspection, batteries and priority repair on the same calendar as monitoring.
Buildings with both a burglar alarm and a fire alarm get two accounts, often at the same station, and they are handled differently: burglar alarms are verified before dispatch, fire alarms are not. Alarm monitoring vs. fire alarm monitoring explains why the invoices look the way they do.
Communicators and the phone line that went away
Older panels dialed a phone line. Many of those lines were cancelled during a carrier switch without anyone connecting the change to the fire alarm, and the panel has been showing a communication trouble ever since. Newer panels use a cellular communicator, and some of those are on networks that have been retired. The current standard is dual-path, cellular plus internet, so one path can fail and the station still hears the building. If your panel is on a single path, or you are not sure, ask. A dual-path communicator installed and tested runs $600 to $1,200 and is the most common monitoring upgrade we do. Fire alarm monitoring covers the central station and the paths.
When the building changes hands or the vendor disappears
Two events break monitoring more than any other. A sale, where the monitoring account is in the previous owner's name and gets cancelled with their other utilities. And a vendor that closes or is acquired, where the station changes or stops without the building being told. In both cases the fix is to confirm, in writing, who the monitoring company is, that the account is active, and whose name is on it. If the original installer is gone, the panel can almost always be monitored by a new station without replacing it; can an existing fire alarm panel be monitored if the installer is gone covers that case.
Multi-building properties
Apartment communities and office parks often have a panel per building, each with its own communicator and account. The contact list should be the same across all of them, and the station should be told which building each account is, by address and building number, so the dispatcher sends the engine to the right one. We have seen accounts named only by the panel's serial number. Fix that during the annual list update. Fire protection for multi-tenant housing covers the apartment-specific points, including waterflow supervision on each building's riser.
Inspection reports and the fire marshal
The annual inspection tests every device and the monitoring path, and the report lists deficiencies the fire marshal expects corrected. Monitoring shows up on that report as a communicator test and a confirmation that signals arrived at the station. A property manager's job is to keep the report, get the deficiencies fixed and documented, and have the file ready when the inspector visits. Fire alarm inspection and testing describes the NFPA 72 schedule, fire alarm inspection requirements in NC, SC and GA covers the three states, and what happens during a fire marshal inspection describes the visit from the inspector's side.
The one-page checklist
Contact list updated and confirmed in writing, annually. Trouble notifications going to a phone or a monitored inbox. Any trouble older than a day treated as a service call. Communicator path known, and dual-path if the building is worth protecting. Account name and station confirmed after any sale or vendor change. Each building's account labeled by address. Inspection report on file with deficiencies cleared. That is the job. Properties in Charlotte, Raleigh, Greensboro, Columbia and Atlanta that are not sure where their monitoring stands can send us a photo of the panel and the name on the last invoice, and we will tell you.







